![switcher studio 3.8 switcher studio 3.8](https://is3-ssl.mzstatic.com/image/thumb/Purple128/v4/ea/0d/af/ea0daf1c-38b8-5277-0654-f2e3da6f80e7/source/392x696bb.jpg)
The silence interval can be adjusted between 2 seconds and 254 seconds in 2 second steps via DIPSwitches.Ī powerful feature of the RB-DSD8 is that by using the Sonifex SCi serial software, the unit can be programmed for different delay durations, levels and switching functions so that you can set up the unit for your specific application. The silence detect level is adjustable between -39dBFS and -84dBFS in 3dBFS steps via DIPSwitches and this level is compared to peak signals. The Sonifex RB-DSD8 has a ‘slave mode’ that allows you to connect two RB-DSD8 units and control them simultaneously from one unit. Pressing and holding the first Link/Select button with any other Link/Select button causes all inputs up to that point to be selected. Each pair has a Link/Select button which illuminates blue when active. Link/Select buttons are used to group channels together to access multichannel operation and switch simultaneously. Each pair can be set to switch manually or automatically and the current setting is indicated by the Mode LED. If switching automatically, the unit switches between the two sources automatically upon the detection of silence.
![switcher studio 3.8 switcher studio 3.8](https://www.ikegami.com/wp-content/uploads/2017/07/skmppgkf.jpg)
If switching manually, silence detection is disabled and the user chooses when to switch using the main or backup buttons. The unit can switch between sources manually or automatically at the push of a button. Two Presence LEDS for the left and right inputs of each stereo pair indicate the input level of the channels. Each stereo pair has an AES LED that shows the status of the digital audio on that channel and a Selection LED to show that input is currently being sent to each respective output.
#Switcher studio 3.8 full
The unit level settings are in dBFS but when using analogue signals the equivalent full scale value can be set to +24dBu, +18dBu, or +12dBu by DIPSwitches.Įach stereo pair has individual settings and controls and when stereo signals are linked, the foremost pair determines the switching characteristics and controls to be used. For the 8 channel outputs, by setting the appropriate DIPSwitches, each stereo output can be designated as either an analogue pair or as a digital output, thus making the RB-DSD8 incredibly flexible and suitable for many different applications.
![switcher studio 3.8 switcher studio 3.8](https://www.ikegami.co.jp/en/wp-content/uploads/2021/10/1s.jpg)
The 2 x 8 channel audio inputs can accept both digital and analogue connections, with the unit automatically recognising a digital input.